LC200 Steering Arm Conversion for 2005-2023 Toyota Tacoma (PRE-ORDER)

Tacoma to Land Cruiser 200 Steering Rack Conversion

Upgrade your Tacoma’s steering performance with our Land Cruiser 200 Series Steering Rack Conversion System — engineered for high-travel, high-load off-road suspension setups. This conversion allows you to replace the factory Tacoma steering rack with the OEM Toyota Land Cruiser 200 Series rack, known for its stronger housing, larger piston, and improved steering precision.

Our custom bracket system positions the LC200 rack to work harmoniously with +2″ to +3.5″ long-travel arms, dramatically improving steering geometry. When installed and aligned correctly, this system reduces bump steer to approximately 1.5° of total toe change across the entire suspension travel range — a massive improvement over stock and typical long-travel configurations.

Key Benefits

• Substantially increased steering rack strength and durability

• Sharper on-center feel and improved feedback at speed

• Bump steer reduced to ~1.5° total across full 13″ travel

• Ideal for +2″ to +3.5″ long-travel suspension systems

• Better control with large tires and aggressive off-road use

Everything required to properly adapt and install the 200 Series Land Cruiser steering rack on your long-travel setup:

• Complete Hardware Kit

  • All necessary Grade-8 / OEM-equivalent hardware for installation.

• Frame Sleeve (New Rack Mount Location)

  • Weld-in reinforcement sleeve designed for the new steering rack mounting point.

• Drill Template for Frame

  • Precision template ensuring accurate hole placement and repeatable rack positioning.

• Steering Arm Set

  • Custom-designed arms to optimize steering geometry with the new rack.

• Eccentric Aluminum Bushing

  • Machined aluminum eccentric bushing to aling the steering rack with the factory differential mount.

• Outer Heim Joints (High-Quality)

  • High-misalignment rod ends used as the new outer tie-rod interface.

• Cut-to-Size Tie Rod Tubes

  • Heavy-wall tubing provided long so the installer can cut to the exact required length for each side.

• Threaded Weld-In Bungs

  • Adapters that weld into the tie-rod tubes, allowing the OEM Toyota inner tie rods to mate with the outer heim joints.

🔧 What You Need

• OEM Toyota Land Cruiser 200 Series steering rack

• Adapter fitting from Marlin Crawler (to connect Tacoma power steering lines)

⚠️ Off-Road Use Only
This product requires professional welding and fabrication. Incorrect installation can lead to steering failure, vehicle damage, serious injury, or death.

By purchasing, the buyer accepts all responsibility for proper installation, use, and maintenance.
No warranty is provided. The seller is not liable for any damages resulting from installation or use.